The MyStrom action you need to control a MyStrom Power Switch.
You have to select the Action Type „MyStrom Action“. After this, you can select your MyStrom device by pressing the search button . Each MyStrom device has 3 triggers (on, off, state). You have to define for each trigger a corresponding action. The following commands are at disposal:
power.on | Turns on the MyStrom Power Switch. You should link it to the trigger „On“. |
power.off | Turns off the MyStrom Power Switch. You should link it to the trigger „Off“. |
state | Theh state command determins the state of the MyStrom Power Switch. It should be linked in any case to the trigger „state“. |
More about the MyStrom Power Switch and how to configure it is desribed in the chapter MyStrom integration.